The best way to deal with the scratches on the instrument panel:
Stick up the instrument panel with a film that is large and small enough.
1. Remove the screw buckle on the instrument panel structure.
2. Pry off both sides with a screwdriver.
3. Take out the dashboard frame.
4. In order to facilitate the construction, the instrument is also taken off and can be made on it, which is not very convenient.
5. Take out the dashboard.
6. Because the instrument panel is uneven, the whole process is finished by hand. Use your fingers to post and reset the instrument panel bit by bit. After pasting, you don't need to worry about these traces. They will disappear in a few days, but there is too much dust, which will become a small bubble if left inside. Replace the instrument cluster.
Jiangmen Motorcycle accessories http://www.itksk.com//
12-29
Jiangmen hardware accessories factory explains CNC processing route
CNC machining, also known as computer gong, CNC ch or CNC machine tool, is actually a method in Hong Kong. Later, it was introduced into the Pearl River Delta in mainland China, which is actually CN
12-29
What are the classifications of Jiangmen hardware accessories processing
Hardware surface processing can be divided into: Hardware painting processing, electroplating, surface polishing processing, hardware corrosion processing and so on. Surface processing of hardware
12-29
Jiangmen hardware accessories factory analyzes its mold processing process arrangement
Mold making refers to the processing of forming and blank making tools, in addition to shear mold and die-cutting mold. Generally, the mold has two parts: upper mold and lower mold. The steel plate
12-29
Jiangmen hardware accessories factory analyzes its hardware molds according to the combination of processes, which are divided into?
Life often see mold, then hardware mold according to the combination of processes, which can be divided into several? 1. Single process module In one stroke of the press, only one stamping process